Grippers, Bar & Chains - Press Parts

Vereinigtes Königreich (GBP£)

INC. VAT

Showing 52 results

Showing 52 results for "Grippers, Bar & Chains"

Products52

QM46 Delivery chain set (single and two colour)Heidelberg equivalent: MV.027.288PP907 Press Parts
£226.80
GTO52 Delivery gripper completeThis is a complete gripper bar. It is a heavy duty clamshell forged body as the original and should be shimmed and set up to match the other bar to ensure the sheets drop correctly Complete ...PP611 Press Parts
£781.20
GTO46 Delivery gripper completeThis is a complete gripper bar. It is a heavy duty clamshell forged body as the original and should be shimmed and set up to match the other bar to ensure the sheets drop correctly Heidelberg ...PP610 Press Parts
£642.60
Small gripper springThere are 2 of these on the GTO52 delivery gripper bar. Heidelberg equivalent: 89.014.009PP990 Press Parts
£4.42
PM/QM46 Delivery Gripper completeThis is the later style 3 spring design. Not suitable for DI machine Heidelberg equivalent: MV.027.278 or A1.014.130PP860 Press Parts
£441.00
GTO/MO/KORD Feed Table GripperYou will need four of these for the KORD or any of the K-series letterpress or offset machines. Although the hole in the gripper which detects the sheet is not required for the K-line it has no ...PP630 Press Parts
£11.98
GTO feed gripper bolt 6mmThis 6mm screw is used in the front hole (nearer to the rubber tip)PP6019 Press Parts
£0.64
GTO feed gripper bolt 10mmThis 10mm screw is used at the rear position. Note do not use this in the front hole as it will protrude through the gripper body and foul the feedboardPP6018 Press Parts
£0.64
SM new (narrow) hooked cylinder urethaneUrethane coated hooked style for after the perfector on later SM102 using the 16mm wide grippers Heidelberg equivalent: 82.582.727PP6009 Press Parts
£56.70
SM older style(wide) hooked cylinder urethaneThis is a urethane coater hooked style gripper 18.9mm wide for the earlier SM102 and SM72 with perfecting Heidelberg equivalent: 91.581.827NPP6031 Press Parts
£35.28
MO/S/SM72/102 Ranger (feed drum) gripperThis gripper is suitable for the register feed (ranger) drum on the S-offset, MO, Speedmaster 72 and earlier Speedmaster 102 Heidelberg equivalent: 27.013.049FPP826 Press Parts
£27.72
MO Delivery GrippersThis gripper is for the later individually sprung delivery gripper bar. Heidelberg equivalent: 43.014.004PP644 Press Parts
£16.92

✕